27×50 House | 27×50 House Design | 27×50 Floor Plan | 27×50 Elevation | 27×50 3D | 27X50 Structure Drawings | 27*50 | AutoCAD Project Files | Revit Project File | Staad Pro Project File
Hello and welcome to 27×50 House Design, In This Blog Post we will Be covering the Complete Details Such as:
27×50 Floor Plan
Elevation and 3D Views
Stairs Details
and Structural Drawings
Table of Contents
27×50 House Design Area Details
| PLOT AREA | 1350SQ.FT. |
| GROUND FLOOR BUILT-UP AREA | 1022SQ.FT. |
| PARKING + OTS AREA | 327 |
| FIRST FLOOR | 1022SQ.FT. |
| FIRST FLOOR BALCONY + OTS AREA | 327SQ.FT. |
27×50 Floor Plan
Ground Floor Plan Detail
On the Ground Floor Plan, as we enter first we get our Parking Area with Stairs Going to First Floor, From the parking, we have our main entrance for the ground floor which opens in the drawing + dining room area
From the drawing-room, we have provided a common washroom
moving forward we get an open kitchen with a ventilation window connecting the parking area
On the backside, we have two bedrooms and an OTS for the ventilation purpose, also we have a washroom from the OTS so that both the rooms can access it
Also, 1st bedroom has an attached wardrobe area
First Floor Plan Details
Moving on the First Floor from the stairs we first get our balcony
There are in total of three bedrooms on the First Floor Plan and a Living area shown in the above floor plan.
27×50 Elevation Details
Plinth Height Is taken as 2feet 6inches from the road level, with a story height of 10feet 6inches each and headroom height as 9feet.
Making a total Building height of 32 feet 6inches plus 1 feet parapet wall above headroom
You can also refer below-provided Elevation for dimension Details
Stairs Detail Plan
Riser Height is taken as 7inches and tread is taken as 10inches making a total of 18 steps for rising of 10’6″ story height
27×50 House Structural Drawings
Column Details Plan
Column sizes are taken as 9inches by 9inches and 9inches by 12inches (230x230mm | 230x305mm)
To get a Complete Column RCC Detail Plan You can Refer to The Project Files
Beam Layout Plan
The beam size is taken as 9″ x 12″ | 230x305mm, To Get a Complete Detail RCC Plan
-Beam Layout and Marking
-Beam Section Details
-Beam Elevation
Foundation Details
27×50 House Design 3d Views
Download 27×50 House Project Files
Buy Complete Project Files @249/-
Files Included:
- AutoCAD- Floor Plan, Elevation Elevation with Dimension and Structural Drawings
- Revit Project Files – Exterior House Design
- Lumion .dae File and .fbx file to load the project in 3ds max
- Textures Used
- High-quality Pdf Files and Images w/o watermarks
Structural Drawing Included:
- Column Layout Plan
- Plinth beam and Beam Layout Plan
- Column RCC Details Plan
- Beam RCC Detail Plan
- Foundation RCC Detail Plan
- BAR BENDING Schedule
Software Files Included:
- AutoCAD
- Revit + Enscape
- Staad PRO
- RCDC
Thank You for Visiting HOME CAD 3D
Do check out our more House Design
